Papresa plastering "L" C6

Papresa plastering "L" C6

Gypsum finish plaster

What is this product?


White gypsum-glue for plastering, repassing or smoothing of the following surfaces:


Cement covered walls.

Gypsum or lime covered walls.

Brick or gypsum-covered bricks walls.

Artex painted walls or until 2 mm wrinkled pastes.

Also used to get rustic terminations in walls.



Monocomponent gypsum-glue for interior use.

Excellent workability for repassing and plastering gypsum walls with a thin coat.

Finely textured surfaces.

Minimum joint retraction.

How to prepare?


1- Pour the water in a drawer and then the product until its saturation.

2- Mix by hand or with a mixer machine (better slow, 500 rpm) until getting a creamy paste.

3- Let it settle for 5 minutes for the additives to act correctly.


Notes: A shaking excess might cause a faster forging.

Never use more water than recommended or add water after the paste settles.

How to use?




The paste must be pasty but not very dense.

It will be applied with a trowel at least three days after placing the walls, with the outlets covered and in the finishing moment to be painted.

Only over large format bricks and gypsum-covered bricks.




Ready paste will be extended with a trowel over the surface which wants to be smoothed, like plastering.

Two layers must be given; one to "fill" the spot and once dry, a second termination layer will be given.

We recommend to sand superficially all the wall to eliminate all the dust and grease and increase it's adherence grade at once.

It's important that the wall is in good conditions and that layers are between 0,5 and 2 mm because absortion doesn't allow a bigger load.

Where to use?


Paste for wall repairing and smoothing, artex painted or wrinkled pastes.

Using substrates: Brick, gypsum-covered bricks, cement, wrinkled paints, gypsum and lime.

Substrates must be solid, hard, clean and dry.

Do not use on: Metal fiber-cement, wood, old tiles or paving stones.

Technical data: Papresa plastering "L" C6





Mix water

Open time

Forging time

Temperature during application

Thermical resistance

Fire Reaction

Product oldage

Paste density

Stockage (from manufacturing date, under cover, in a dry place)



White Powder

25 and 5 kgs bags

+/- 1 kg/m2 (depending on spot)

Until saturation

35 minutes

1 hour

Min 5ºC, max 32ºC

From -5ºC to 80ºC


not in 50 years

1,2 gr/cm3

12 months



Gypsum of a purity superior to 95% of calcium sulphate.

Organic and unorganic additives.

Plastifiers and impermeabilizers.



Product components are not toxic.

It must be worked with gloves, avoid powder inhalation and contact with eyes and skin.

Keep away from children or animals.

First Aid


Skin: Wash with plenty of water.

Eyes: Wash with plenty of water.

Ingestion: Rinse with water and drink plenty of water.

This technical data is written according to our knowledge and essays and doesn't assume any commitment. It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the working conditions. Technical data for 2009.