Projection dry mortar

Projection dry mortar

Dry mortar for mechanical application

What is this product?


It's a grey mortar to be projected with machine on brick walls or concrete blocks, acting as a glue for the fiberglass boards or rockwool rolls.

Also for cement walls.

Characteristics

 

Easy application with projection machinery.

Great adherence power for aislant elements placing.

Waterproof: Protects against humidity.

Monocomponent.

How to prepare?

 

This product is specially designed to be applicated with projection machinery.

It's recommended to adjust the machine in a 25% mortar/water relation and modify this relation until getting the paste density wanted.

The mortar/water relation may change depending on working conditions.

In case of hand application, mix in a 6-7 water litres bowl per each 25 mortar kgs.

How to use?


Project the mortar on the wall.

The water volume must be graduated to get a paste density with no slipping-off.

Once projected, mortar must be smoothed with a trowel, trying that all the surface is covered and eliminating at once possible air bags.

Resultant coat width must be between 5 and 8 mm.

Fix the fiberglass or rockwool panels through manual pression.

It's recommended to place these aislant panels from up to down, for the panels that must be cutted are the ones down, in order to ease the work as much as possible.

Fix the panels during the "open time" (20 minutes).

Out of this time, its properties are reduced.

Technical data: Projection dry mortar


Aspect

Presentation

Output

Mix water

Coat width

Open time

Temperature during application

Fire Reaction

Stockage (from manufacturation date, under cover, in a dry place)

 

 

Grey Powder

25 kgs bag

6-7 kg/m2

+/- 25%

5-10 mm

20 minutes

min 3ºC, max 30ºC

A1

12 months

Composition


Grey cement.

Siliceous soils.

Additives.

Precautions

 

Product components are not toxic.

It must be worked with gloves, avoid powder inhalation and contact with eyes and skin.

Keep away from children or animals.

First Aid

 

Skin: Wash with plenty of water.

Eyes: Wash with plenty of water.

Ingestion: Rinse with water and drink plenty of water.

This technical data is written according to our knowledge and essays and doesn't assume any commitment. It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the working conditions. Technical data for 2009.